Vacmaster Pro160, Руководство пользователя

Страница: 6 / 16

Machine Setup
▪ Read all instructions before operating Pro160.
▪ Plug Pro160 into grounded electrical outlet.
▪ Turn Pro160 ON. Push the blue “ON/OFF” button at the top left corner of the
control panel. **NOTE** Pro160 will be in AUTO MODE when first turned on.
▪ To switch between AUTO and MANUAL modes, press the blue MODE button
to the right of the LED screen. Pro160 is now ready for use.
Operating Machine in AUTO MODE
1. Turn machine “ON” by pressing the blue “ON/OFF” button.
**NOTE** Machine is set to AUTO MODE when turned on each time.
2. Refer to the indicator lights labeled AUTO and MANUAL above of the
LED screen to check vacuum mode. The light will shine above the word
AUTO when in AUTO mode.
3. Select proper size
VacMaster
®
barrier vacuum bag and insert product
to be packaged. Allow minimum of 1”-2” of extra headspace at top of bag to
ensure a quality, air-tight seal.
4. Lay open end of bag across Seal Bar, keeping opening within the perimeter
of the Vacuum Channel.
5. Close lid. Press the green START button to engage vacuum pump.
6. Press and hold down lid (with slight pressure) to start vacuum cycle. Release
when bag collapses on product.
7. The Pro160 will go through the vacuum process until an internal sensor
indicates all air has been removed from the bag or canister. Machine will
automatically switch to seal function when vacuum is complete.
Machine will stop automatically.
8. Remove bag and inspect bag and seal.
(Note: A positive seal will look clear upon inspection. If the seal is spotty, incomplete, wrinkled,
white or milky, remove sealed portion and run vacuum and seal process again.)
5
Operating Instructions