Vacmaster DVTB2010, Руководство оператора, Страница: 16 / 22

16
GB
WARNING: ONLY PERFORM THE STEPS DESCRIBED WITHIN THESE
INSTRUCTIONS!
WARNING: REMOVE THE BATTERY PACK BEFORE TROUBLESHOOTING.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum cleaner.
To maintain a high cleaning performance from your machine, it is important to replace or clean
cartridge filters as necessary. This can be done with a soft brush, being careful not to damage the
cartridge filter.
A performance drop with clean filters can only be caused by a blockage in the tools or the hose.
TROUBLESHOOTING
Problem Possible Cause Solution
The vacuum cleaner will not
operate.
The battery has no capacity. Charge the battery.
The battery is not inserted
properly.
Insert the battery pack correctly.
Wrong battery being used.
Be sure to use only the battery
and charger supplied with your
product.
The vacuum cleaner power is
weak.
There is a blockage in the hose,
filter or the tank inlet. Check the hose, filter and tank
inlet for blockage.
The cartridge filter is blocked.
Remove the filter and clean it or
install a new filter.
The collection tank is full. Empty the collection tank.
Low battery capacity. Charge the battery.
The vacuum cleaner turns off
on its own.
The battery may be depleted. Change the battery.
The dust escapes from vacuum
cleaner.
The filter is missing or installed
incorrectly. Check the filter for correct
installation.
The filter is damaged.
Replace the filter. Purchase
online at www.cleva-europe.
com.