Vacmaster CDM0610P, Оригинальное руководство пользователя, Страница: 10 / 20

10
GB
1. Switching On/Off
Connect the mains plug to a suitable power outlet.
To turn the vacuum cleaner ON, press the power switch once.
To turn the vacuum cleaner OFF, press the power switch again.
2. Dry Vacuum Operation
OPERATION
1) This vacuum cleaner can be used with or without dust bags. To use a dust bag, remove the
pre-installed pre-filter and fully fit the dust bag flange onto the inlet stub.
2) Place the pre-filter back into the container. Ensure the notch of the pre-filter is aligned with the
inlet stub. The pre-filter is designed to cover the full circumference of the container (Fig. 5).
3) Secure the locking end of the hose into the vacuum suction port.
4) Push the desired accessories onto the hose nozzle. The air flow regulation on the suction hose
allows you to change vacuum cleaner suction. For best cleaning results, fully close the air flow
regulation (Fig. 6).
5) Verify that the container latches are secured. Plug the power cord into a power outlet.
6) Turn on the motor by pressing the On/Off switch.
7) Once you have completed vacuuming, press the On/Off switch again and unplug the power
cord from the power.
WARNING:
ENSURE YOU READ, UNDERSTAND AND APPLY SECTION ENTITLED
‘SAFETY INFORMATION’.
WARNING:
BEFORE INSTALLING, REMOVING OR CLEANING THE VACUUM
CLEANER FILTER, ENSURE THAT THE POWER CORD IS UNPLUGGED AND
SWITCHED OFF.
IMPORTANT
: Check the filter regularly for optimal performance. An old or blocked filter will
reduce suction performance.