-14-
3. Reinstall the exhaust foam filter cover by inserting the two tabs on the cover
into the slots at the bottom of the canister. Then press the cover into place and
ensure the release latches snap into place until you hear a click.
slots
Checking and Removing Clogs
For best cleaning results, keep the airflow passage open. Check the following
areas occasionally for clogs. Turn off and unplug vacuum cleaner from outlet
before checking.
1. Turn off the vacuum cleaner. Separate the floor nozzle from the telescoping
wand.
2. Separate the hose from the telescoping wand and turn vacuum cleaner on.
Check the end of the hose for suction. If there is good suction on the hose
handle, there is no clog in the hose. If the suction is low, remove any dirt or
debris in the hose and handle.
3. Check the wand and remove any dirt or debris in the wand.
4. Check floor nozzle swivel and inlet port. Remove any dirt or debris.
