V3SOUND ROMMEX, Руководство пользователя

Страница: 4 / 16

3
V3SOUND
TO TURN ON
Before you turn the device on or off, make sure that
all connected audio devices that amplify the audio
signal (mixer, amplifier, active loud speakers) have
their volumes turned down.

Turn on your MIDI-instrument

Wait till your MIDI instrument
is full bootet

Press the POWER ON/OFF switch on
the back of the V3 unit.

Turn up the V3 unit MAIN VOLUME
knob to adjust the volume.

Adjust the volume on your mixer or
active loudspeaker.
CONNECT – USB KEYS
The V3 unit can be connected to any USB Audio
Class 1 compatible MIDI instrument.
The V3 unit can supply your USB instrument with a
maximum of 500mA.
If your MIDI instrument requires more than 500mA,
you will need an external power supply.
Just plug in your USB instrument here.
SUSTAIN FOOT PEDAL
The polarity of the sustain foot pedal is set up
automatically when you turn on the V3 unit.
The pedal only works on MIDI channel 1.
AUX OUT - 2nd STEREO OUT
To use the AUX OUT for any MIDI channel, you
must manually change the 4 internal switches
and send a NPRN MIDI message on the specified
MIDI channel.
The connection changes from 2 mono jacks to 2
stereo jacks.
One stereo jack gives you the MAIN in stereo; the
other one the AUX in stereo.
SELECT SOUNDS
The V3 unit is a 16-channel, multi-timbral MIDI
tone generator. Change sounds by sending a
program change through MIDI.
After POWER ON no program is selected.
The sound board will just give sound, when you
call up a sound with a bank and program num-
ber from this sound list.
Sending a bank message with another value -
NO SOUND!
STEREO L + R = BABAA (grafic)
AUX = BBABB
TIP
Turn the volume on the V3 unit as loud as
possible, and then adjust the volume of the
sound on your mixer.
The sound board will just give sound, when
you call up a sound with a bank and program
number from this sound list. Sending a bank
message with another value - NO SOUND!
MSB Bank 80
Prg. change 1
NO SOUND

!