V3 SOUND Grand Piano XXL, Руководство пользователя

Страница: 9 / 25

13 14
V3 SOUND
You have to decide at the beginning if you want to use two Mono MFX Effects or one
stereo MFX Effect.
For two mono MFX send the following MIDI messages on MIDI channel 1:
For one stereo MFX send the following MIDI messages on MIDI channel 1:
The "MFX Reset" message only resets some parameters of the MFX effect - NOT ALL.
6.2 MFX - Reset 6.3 MFX - Mix Control
Use MFX 1 and 2 as two mono effects
MIDI controller 99 value 58
MIDI controller 98 value 127
MIDI controller 06 value 0
Reset MFX 1
MIDI controller 99 value 59
MIDI controller 98 value 127
MIDI controller 06 value 0
Reset MFX 2
Mix Control send all controller messages on Channel 1
MIDI controller 99 value 58
MIDI controller 98 value
45
MIDI controller 06 value 40
58 for MFX 1 With this value you set how
much reverb you want.
40 is a standard value.
MIDI controller 99 value 59
MIDI controller 98 value
45
MIDI controller 06 value 40
59 for MFX 2 With this value you set how
much reverb you want.
40 is a standard value.
MIDI controller 99 value 60
MIDI controller 98 value
45
MIDI controller 06 value 40
60 for MFX 1&2
for stereo With this value you set how
much reverb you want.
40 is a standard value.
Use MFX 1 and 2 as one stereo effects
MIDI controller 99 value 60
MIDI controller 98 value 127
MIDI controller 06 value 0
Reset MFX 1&2
to stereo
Mix Control Parameter Tip
33
Input gain
0 to 127 0 = low
127 = high
34
Input low-cut filter
0 = OFF, till 127 = ~300Hz
35
Input high-cut filter
0 = ~1.5KHz,...100=~6KHz, till
127 = OFF
42
Output volume
0 to 127
43
Output panorama setting
0=left, till 127=right
44
Output audio to MAIN or AUX
0 = only Front, 64 = both
till 127 = only Rear
45
Output
How much level is sent to the
Global Reverb after the
MFX Effect section
Should the sound after the multi-
effect be refined with a reverb?
Would be a good idea for many
applications.
46
How much level is sent to the
Global Chorus after the
MFX Effect section
-"-