![background image](http://html1.mh-extra.com/html/v2/ayros-230v/ayros-230v_manual_3106726037.webp)
ENGLISH
- 35 -
3.5 - MOTOR OVERRIDING SYSTEM
In case of absence of current, the gate can be released by
operating on the motor:
1.
Open the hatch of the lock
J
in front of the motor
2.
Insert the key
K
in the lock and turn clockwise to open
the hatch of the release on the side
3.
Insert the key
L
into the hole and turn clockwise until
reached the limit switch
4.
At this point you can manually move the gate
To restore the automation, proceed as follows:
1.
Bring the gate to the fully closed position
2
. turn the key
L
anticlockwise until reached the limit
switch, then draw it out
3.
turn the key
K
anticlockwise closing the hatch of the
lock, then draw it out
4.
Close the lock with the hatch
J
3.6 - INSTALLATION LAYOUT
1
3
E
5
4
A
B
F
D
2
C
LENGTH OF THE CABLE
< 10 metres
from 10 to 20 metres
from 20 to 30 metres
Power supply 230V
3G x 1,5 mm
2
3G x 1,5 mm
2
3G x 2,5 mm
2
Photocells (TX)
2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 0,5 mm
2
Key switch
4 x 0,5 mm
2
4 x 0,5 mm
2
4 x 0,5 mm
2
Photocells (RX)
2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 0,5 mm
2
Flashing light
2 x 1,5 mm
2
2 x 1,5 mm
2
2 x 1,5 mm
2
Antenna (integrated into the flashing light)
RG174
RG174
RG174
A
B
C
D
E
F
1
2
3
4
5
Key switch
Pillar photocells
Pillar-mounted digital radio switch
Safety edges
WES-ADI module (via radio management of edges)
WES sensors
Motor
Transmitter
Receiving module
Photocells
Flashing light
COMPONENTS
ADDITIONAL ACCESSORIES
L
K
J
Содержание AYROS-230V
