E
N
G
L
IS
H
11
LED SIGNALS ON THE BASE UNIT
CONDITION
GREEN LED (RADIO) RED LED (ALARM)
LED OUT 1
LED OUT 2
LED BAT LOW
DIP-SWITCH 8 OFF
NETWORK NOT
CONFIGURED
• Flashes slowly
• Off
• Off
• Off
• Off
NETWORK
CONFIGURED
• A brief flash with
every message
received (with just
one sensor, the
period is 15 sec.)
• Fixed on if there is no
connection with a sensor
• Series of 4 flashes if the
network channel does
not correspond with
dip switch 3-6
• On when output
OUT1 is activated
(sensor alarm
associated with
unit 1)
• On when output
OUT2 is activated
(sensor alarm
associated with
unit 2)
• On when the LOW
BAT output is
activated (one of
the sensors has a
flat battery)
NETWORK
CONFIGURATION
ONGOING
• A brief flash with
every message
received
• Slow flashing until
at least one sensor is
inserted in the
network
• One, two or three
flashes, depending on
the unit being
configured (button
pressed once, twice or
three times)
• Slow flashing during
network deletion (button
pressed and held down)
• Off
• Off
• Off
CONDITION
GREEN LED (RADIO) RED LED (ALARM)
LED OUT 1
LED OUT 2
LED BAT LOW
DIP-SWITCH 8 ON
NETWORK NOT
CONFIGURED
• Channel quality
1.
Channels where maximum quality has been
measured: green LED flashes 3 times
2.
Channels with near maximum quality:
green LED flashes twice
3.
Channels with above-average quality:
green LED flashes once
4.
Channels with below-average quality:
red LED flashes once
5.
Channels with minimal quality:
red LED flashes 3 times
• Off
• Off
• Off
NETWORK
CONFIGURED
• Fixed
• Fixed on if there is no
connection with a sensor
• Series of 4 flashes if the
network channel does
not correspond with
dip switch 3-6
• On when output
OUT1 is activated
(sensor alarm
associated
with unit 1)
• On when output
OUT2 is activated
(sensor alarm
associated
with unit 2)
• On when the LOW
BAT output is
activated (one of
the sensors has a
flat battery)
