V2 25B005, Руководство пользователя

Страница: 26 / 88

ENGLISH
- 24 -
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
Press the
-
key until the
display shows
I
Press and hold key
Press and hold key
Press and hold the key
for 5 seconds:
I
flashes
The dot appears on the
display after approx. 1
second
The dot appears on the
display after approx. 1
second
Release the key: the
segments of the display
illuminate one at a time
until showing
0
Release the key and press the remote control button
twice: the device emits a BEEP and the dot is turned off
to confirm memorising has been successful
Hold the key until the
display is turned off : the
remote controls have been
deleted.
9.8 - END PROGRAMMING
To exit the programming and store the settings of the different parameters, it is necessary to follow this procedure:
10 - MEMORISING RADIO TRANSMITTERS
The device can memorise up to 15 radio transmitters. Proceed as follows:
11 - DELETING RADIO TRANSMITTERS
12 - DISPLAY MESSAGES
Display Reason
L
The display shows the letter
L
when the actuator is working normally and the red cam positioned on the chain activates
the micro switch on the motor
F
The display shows the letter
F
when the door encounters an obstacle
H
The display shows the letter
H
when the encoder or the control unit is malfunctioning
A
The display shows the letter
A
when the photocell intervenes