Installation instructions
Convenient storage drawer
for tumble driers
J283.050-3
13.8.09 ITH
7
These installation instructions apply to the models:
283–286
,
296
,
954–959
* Material is not required with the tumble drier.
Plinth
W5.2014
(for visual adaptation).
Preparation
1. Unplug the mains connection plug or switch off at the wall switch.
Installation
2. Pull the appliance out of the niche and remove the
installation plate from the floor; this is no longer required.
3. Place the convenient storage drawer
1
on the same spot
and remove the drawer
2
by lifting the black rail springs
4
at the side.
4. Stick the installation template
3
to the floor centrally
between the adjustable feet.
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
General notes
A full repair can only be guaranteed providing the non-destructive deinstallation of the complete appliance is possible at any
time.
Installation accessories included
Designation
Number of items
Designation
Number of items
Floor mounting plate incl. double sided adhesive discs
2
U-washers St EZN *
4
Nylon plug Delta size 6
2
Combi spanner 19 mm
1
Countersunk head wood screws 5 × 30
2
Combi spanner 27 mm *
1
Installation template for floor mounting plate
1
Hexagon box spanner *
1
Hexagon nuts 0.8D St EZN *
4
Allen key *
1
Options
Dimensions
Installation
Lifting and positioning of the tumble drier must be carried out by 2 persons. During installation the tumble drier must not be
tilted from the vertical by more than 45°, otherwise the appliance will have to be left standing in its normal operating position
for about 2 hours prior to startup.
430
21
~340
550
595
Top view
4
2
1
3
