5
Operation
5.1
Switching the appliance on
▸ Plug in the appliance at the mains.
–
The status lights illuminate for 10 seconds.
▸ Hold the button depressed for 3 seconds.
–
The appliance is switched on.
–
The average temperature for the last 2 hours is shown in the corres-
ponding temperature display.
A newly installed appliance that is filled with bottles of wine takes
around 24 hours to reach the set operating temperatures.
5.2
Setting the temperature
The temperature can be set between 5 °C and 18 °C.
▸ Hold one of the two
buttons depressed for 3 seconds.
–
The corresponding set temperature flashes in the temperature display.
▸ Press the required
button repeatedly until the desired temperature
flashes.
–
If no further settings are made after 5 seconds, the temperature dis-
play stops flashing and the value that has been set is accepted.
–
The average temperature for the last 2 hours is shown in the temperat-
ure display; the set temperature will be reached after a few hours.
The value displayed may be different from the set value if the appli-
ance door is left open for longer or if warm bottles have been placed
inside.
The set temperature in the lower cooling zone must be the same as or
higher than that in the upper cooling zone. If operating the appliance
without the divider shelf, the temperature settings for both cooling
zones must be identical.
13