background image

Installation instructions

Room air laundry dryer
One-family household

1064364-07

04/10/2022

1064364-07

6

Adhering the installation plate to the washing machine

When installing the washer-dryer tower, do not drill any holes in the washing machine! Adhere installation plate into
place!

Failure to use the correct installation plate can result in damage to the appliance!

Use the installation plate supplied to install the washing machine. The use of an unsuitable installation plate or a soft, sound-
insulating underlay can cause damage to the appliance which does not fall within the scope of the manufacturer’s guarantee.

For washing machine models 11001–11006, 11010–11014, 11021, 11023, 11025

Take out the double-sided adhesive tape 

1

 and adhere to the mount-

ing surfaces 

2

.

1

2

2

2

2

For washing machine models 265, 266, 268, 269

Click in the six positioning cams 

3

.

Cut out the mounts 

4

.

Adhere the double-sided adhesive tape 

1

 to both sides of the mounts

4

.

Turn over the installation plate.

Adhere the mounts 

4

 to the 4 mounting surfaces 

5

 precisely.

4

1

3

3

3

3

3

3

5

5

5

4

Adhering the installation plate into place

Turn over the installation plate. Push to the front edge of the washing
machine cover plate (see arrow) and adhere into place.

Take the tower panel 

6

 out of its fixture on the back of the tumble

dryer.

Install the tower panel on the mounted installation plate.

6

Содержание V4000 DualDry











Отзывы: