V-ZUG UnimaticWash V4000, Руководство по эксплуатации

Страница: 17 / 56

4 Programme overview
4.3 Additional functions
Temperature setting
The temperature can be changed in steps of 10 °C or 15 °C, allowing slightly
soiled (not stained) textiles to be washed with a saving in energy.
Cold wash: Not heated
Spin speed
The spin speed can be changed in steps of 200 rpm (1200, 1000, 800, 600,
400 rpm, stop after rinsing, 1600, 1400 rpm). Delicates can thus be spun at a
low spin speed. However, this increases the drying time (greater energy con-
sumption for tumble drying).
Delayed start
Take advantage of cheap-rate electricity (setting range of up to 24 hours).
When the time set is reached, the programme starts automatically.
Fast forward / End of programme
Touch the button to skip individual parts of a programme at any time during
the programme sequence.
Pause / Door opener / Drum illumination
Touching the button 1× when a programme is running will cause the pro-
gramme to pause. The drum illumination is switched on at the same time.
Touching the
button again will cause the appliance door to open provided
the appliance is in a state that allows this action (depends on the water level,
temperature and speed).
Touch the flashing main programme button to end the pause and resume the
programme.
The drum illumination can be turned on and off.
17