V-ZUG UnimaticWash V4000, Руководство по эксплуатации

Страница: 20 / 56

5 Washing
Liquid detergent and a delayed start
If a delayed start has been selected, after loading the washing the liquid detergent
should be added to a dosing aid (e.g. ball). It is important that the liquid detergent does
not spill onto the washing during the delayed start period, otherwise the washing could
be damaged through a possible chemical reaction.
Detergent dosage
Adding too much washing detergent can cause excess foaming, giving a poor
wash result and, in the worst case, causing damage to the appliance.
The amount of detergent required depends on the degree of soiling as well as the wash
load, the hardness of the water and the product being used. Follow the detergent manu-
facturer’s dosing instructions.
The hardness of the water is measured using the French degree of water hardness (° fH)
and is subdivided into three categories:
▪ Soft 0 °fH to 15 °fH
▪ Medium 15 °fH to 25 °fH
▪ Hard over 25 °fH
(NB Use water softener to reduce amount of washing detergent required.)
The local water authorities can provide information on the level of water hardness in your
area.
Compartments
Conventional washing
II I
Pre-wash detergent
Compartment I
Main wash detergent Compartment II
Fabric conditioner (softener) Compartment
Bio wash
Alkaline detergent Compartment II
Bleach Compartment I
Fabric conditioner (softener) Compartment
Soap wash
Water softener Compartment I
Soap detergent Compartment II
Fabric conditioner (softener) Compartment
Do not fill with fabric conditioner past the «MAX» mark.
Soap detergent (so soap detergent)
Select the additional «Soap wash» programme to wash with soap detergent.
Since soap binds with lime, soap detergent should only be used when the water is soft
or moderately hard (up to 25 fH) and limescale protection is added. Soap scum can oth-
erwise form and build up in the laundry and the appliance. Further, limescale build-up on
the tub heating element can result in damage to the appliance.
20