V-ZUG Toptronic GK45TEASC, Руководство по установке

Страница: 5 / 8

Installation instructions
Toptronic
GK45TE
Glass ceramic hob
1039710-R02
05/03/2019
1039710-R02
5
Installation with stone covers
With stone covers, the installation rails K and L can be stuck into place (for adhesive see Accessories [ } 2] ).
1. Clean/prime the bonding surfaces on the stone and installation rails well and leave to dry thoroughly.
2. Apply the adhesive to the stone and smooth with a scraper. Apply a thin layer of activator to the bonding surface of the installation
rails.
3. Centre the installation rails and press down on them firmly. Observe the recommended setting time of the adhesive used.
4. Installation with bevel: Before installation of the hob, all stops N must be dismantled.
5. Potentially connect to the electrical mains connection before inserting the appliance.
6. Lower the appliance symmetrically into the mounting cut-out until it reaches the spring clips on the work surface. The connection
cable must not touch the hot areas of the tray located underneath the cooking zones.
Overlying installation
The layout of the hob to be fitted may differ from the hob illustrated!
490±1
≥50
≥50
A
680±1
600/55
0
=
=
=
=
Ra
571
50
1
Y
Y
Ri
H
490±1
560±1
≥50
≥5
0
A
600/550
Ra
501
Ri
H
691
Y
Y
490
±1
≥50
≥50
750±1
600/550
A
Ra
50
1
761
Y
Y
Ri
≥20
*
B
Y – Y
Drawer/cabinet
Cable length 1.7 m Cable length 1.7 m Cable length 1.7 m
GK45TEBSZ, GK45TEGZ,
GK45TESZ, GK45TESZO GK45TEXSZ, GK45TEXSZO GK45TEASZ, GK45TEASZO
* The required clearance must be observed!
GK45TEXSZ and GK45TEXSZO are to be installed with adjusting braces and not installation strips.
Type A Depends on producer B H Corner radius Ra/Ri
GK45TEASZ, GK45TEASZO,
GK45TEGZ, GK45TEBSZ,
GK45TESZ, GK45TESZO,
GK45TEXSZ, GK45TESXZO ≥20 mm ≥67.5 mm 46 mm 5/1.5 mm
A Worktop depth (in combination with directly built-under oven; does not apply to small appliances)
B Required clearance for ventilation and service replacement over the entire cut-out area.
H Dimension from the top of the work surface to the underside of the hob (ventilation opening)
Ri Corner radii of appliance Ra Outer corner radii of cut-out