26
User settings
Accessing
A
With the induction hob switched off, hold
touch button pressed and
touch 3 slider fields from left to right within 1 second.
– Every touching is acknowledged by an acoustic signal.
– On the left,
flashes alternately with
.
– Displayed on the right is the actual value for the selected program step.
Navigation / Entering values
Separate sliders are used for navigating through the individual user settings
and for changing setting values.
The slider by the left hand display is used for the settings of program steps
PO to P7 and the slider by the right hand display, for the settings of the
desired values.
In order to navigate through the individual settings, resp. to change settings,
the left hand half of the slider field simulates a negative key and the right hand
half simulates a plus key.
Saving entries / Exiting the user settings
By holding touch button
pressed for 2 s, all value changes performed up
to this point are stored and the user settings are exited. The control unit
signals successful storage by an acoustic signal.
A double acoustic signal sounds in the case of an erroneous entry.
