V-ZUG GK21TG, Инструкция по эксплуатации

Страница: 16 / 20

Specification
規格
Model
型號
Product description
產品描述
Product dimensions
產品尺寸
H52 x W302 x D520 mm/
毫米
Net weight
淨重
6.43 (kg/
公斤
)
Heat input
熱量額定值
Front
前
:2.8, rear
後
: 1.9 (kW/
千瓦
)
Operating gas pressure
操作氣壓
/r a b m 8
毫巴
Safety Dis ance t
安全距離
不少於
Not less than 50mm
50mm
根據香港氣體安全（氣體安置技工及氣體工程承辦商註冊）法例第51D章，任何氣體配件(包括接駁軟喉)的安裝,
/更換必須由香港政府註冊氣體工程承辦商僱用的註冊氣體安裝技工負責, 否則即屬違法.
“Under the Gas Safety (Registration of Gas installers and Gas Contractors) regulations (Chapter 51D),
only registered gas installers (registered to the appropriate class) employed by registered gas
contractors can personally carry out gas installation, regulation.
-
-
GK21TTG
Two burners Towngas hob
兩頭煤氣爐
Additional Installation Instruction
附加安裝說明
Warning
警告
:
Connection of Town Gas rubber tube
- It must be used approved rubber tube bearing EMSD Approval marking (such as “EMSD Approval
GTXXXX”) and fuse cock for piped gas supply or regulator for connection.
Connection of stainless steel flexible hose BSP MALE
- It must be used approved stainless steel flexible hose BSP MALE bearing EMSD Approval marking (such as
“EMSD Approval GTXXXX”) and approved fuse cock or gas cock for connection.
HK Town Gas connection
- Governor MDG Elitre GVN-01 (Models EL-90) should be installed.
煤氣膠喉之接駁
- 必須使用合格印有機電工程署批准標記(例如，“機電工程署批准 EMSD Approval GTXXXX” 字樣)
之膠喉及煤氣使用的溢流掣進行接駁。
煤氣不銹鋼軟喉接駁
- 必須使用合格印有機電工程署批准標記(例如，“機電工程署批准 EMSD Approval GTXXXX”) 之
不銹鋼軟喉及溢流掣或氣掣進行接駁。
香港煤氣接駁
接駁煤氣時須加上穩壓器MDG Elitre GVN-01(型號 EL-90)。