background image

Installation instructions

Built-in variants of gas hob

Multi-Sliders GAS411/421

1037456-05

26/07/2023

1037456-05

1

According to the Gas Safety Ordinance of Hong Kong, any gas installation works, including the installation of appli-
ances and connection tubing, must be undertaken by registered gas installers who are registered for the appropriate
classes and are employed by registered gas contractors.

Check that the local connection conditions (gas type and gas pressure) and the appliance setting match before con-
necting the appliance.

The default values for this appliance are provided on the information plate (or on the identification plate).

This appliance is not connected to a combustion by-product outlet. It must be set up and connected according to the
applicable installation conditions. Particular attention must be paid to the relevant ventilation requirements.

If installing into a combustible material, the guidelines and standards for low-voltage installations and fire protection
must be strictly observed.

All leak tests should be done with a soapy water solution. Never use an open flame to check for leaks!

When installing a built-in gas hob on top of a stove cabinet, please check that there is provision for ventilation at the
cabinet to ensure proper operation of the gas hob.

Use approved gas tubing bearing the EMSD approval marking (such as: 

 EMSD APPROVAL

GTXXXX) for connection to appliances.

Do not store any flammable materials, sprays or pressurized containers inside the stove cabinet.

Validity

These installation instructions apply to the following models:

Type

Model number

Appliance class

31063

GAS411GSBZ

Class 3

DIN EN 30-1-1

31064

GAS421GSBZ

General notes

Identification plate

The identification plate is located on the underside of the
hob.

Identification plate

Depending on 
appliance, plate 
with additional 
information

Affix the second identification plate (supplied) in an accessible position behind the front of the fitted cabinet beneath the appliance.

Care and maintenance

Follow the care and cleaning advice in the operating instructions.

Follow the basic maintenance advice in the operating instructions.

Содержание GAS421 Series








Отзывы: