V-ZUG DWVMR9, Руководство по эксплуатации

Страница: 8 / 20

3 Operating the appliance
2.6 Operating and display elements
Switching off
Power level 1
Power level 2
Power level 3
Intensive level
Illumination ON/OFF
Flashing: Clean grease filter / saturation indicator for filter
Flashing: Saturation indicator for activated charcoal filters (recirculation model), de-
pending on use:
– Replace standard activated charcoal filters
– Clean and replace long-life activated charcoal filters
Depending on the model and features, the specification of the appliance may differ
from the standard specification described herein.
3 Operating the appliance
3.1 Operation
Switching the appliance on
▸ With the appliance switched off, hold the button depressed for three seconds.
– The stand-by mode is activated.
– The button illuminates.
▸ Pressing the / / or button switches the appliance on at power level 1, 2, 3 or in-
tensive.
– The corresponding button illuminates to indicate which power level is being used.
–
If the intensive level is selected, the button also illuminates for the power level that
was running when the intensive level was started.
We recommend switching the appliance on at power level 1 five minutes before
cooking. Use a low power level for normal cooking smells and a higher power
level for very strong cooking fumes and smells.
Switching the appliance off
▸ Depress the button for three seconds.
–
The appliance is switched off and no buttons are illuminated.
– Only the illumination can be switched on/off.
After you have finished cooking, allow the appliance to run for another 15 minutes
so that the cooking fumes and smells can be extracted.
8