V-ZUG DW-N9, Руководство по эксплуатации

Страница: 11 / 24

3 Operating the appliance
Ending before time
▸ While the intensive power level is activated, touch the .
– The intensive level switches off before time and the LED for the button goes
out.
– The appliance switches back to the previously selected power level or switches off.
3.6 After-running time
The purpose of the after-running time function is to remove any lingering smells after
cooking. The appliance continues to run at the power level set for 30 minutes and then
switches off automatically.
Switching on
▸ Select power level , or .
▸ Hold the button depressed for 3 seconds.
– The after-running time is activated and the LED for the selected power level flashes.
– The appliance continues to run for 30 minutes and then switches off automatically.
The after-running time function cannot be activated with the intensive power level.
Ending before time
▸ With the after-running time activated, hold the button depressed for 3 seconds.
– The after-running time function is deactivated and the LED for the selected power
level illuminates.
▸ To switch the appliance off completely: Touch the button 1× if the appliance is
on power level 1.
▸ Touch the button 2× if the appliance is on another power level.
– The appliance switches off.
3.7 Saturation indicator alarm
Metal grease filters
The saturation indicator illuminates continuously after 100 operating hours, irrespect-
ive of whether the appliance is switched on or off. The saturation level has been reached
and the metal grease filters must be cleaned.
Activated charcoal filter (recirculation mode only)
The saturation indicator flashes after 200 operating hours, irrespective of whether the
appliance is switched on or off. The saturation level of the activated charcoal filter has
been reached. The activated charcoal filter has to be cleaned and regenerated or re-
placed. The metal grease filters have also to be cleaned. Observe the cleaning instruc-
tions.
Reset the saturation indicator alarm after cleaning.
▸ Switch the appliance and the illumination off.
▸ Hold the
button depressed for 3 seconds.
– The LED for the saturation indicator flashes three times.
– The saturation indicator goes out.
11