V-ZUG DFN 6, Руководство по эксплуатации, Страница: 19 / 28

5 Care and maintenance
5.3 Replacing the standard activated charcoal filter
Remove the screw fuse for the appliance or switch off the circuit
breaker.
Standard activated charcoal filters are only used in the recirculation model.
The standard activated charcoal filter is to be replaced after an operating time
of three to six months. Standard activated charcoal filters cannot be washed or
regenerated.
The spent standard activated charcoal filter can be disposed of in the
household waste.
▸ Remove both metal grease filters 1 .
▸ Press the two red retaining slides 2 on the standard activated charcoal filter
3 upwards. At the same time pull down the filter and remove from the holder
4 .
▸ Slide the new standard activated charcoal filter up under the clip and se-
cure in the fixture 4 . To do this, snap the red retaining slides 2 into place.
▸ Put both metal grease filters 1 back in.
▸ Put the screw fuse back in or switch the circuit breaker back on again.
3
1
2
4
3
2
19