Turn off appliance
This setting turns off the whole appliance.
Switching off the entire appliance
Fig. 8
u
Activating/deactivating (see 6.2 Control concept) .
w
Off: Display goes black.
6.5 Fault messages
Fault messages appear in the display. There are two catego‐
ries of fault message:
Category Meaning
Message Reminder of general procedures. You can carry
out these procedures to eliminate the message.
Warning Appears when there are malfunctions. A signal
sounds in addition to the display. The signal
becomes louder until you acknowledge by
tapping the display. You can eliminate simple
defects yourself. For more serious defects, you
must contact customer service.
6.5.1 Warnings
Close the door
This message appears if the door is open for too long.
You can set how long it takes for this message to appear .
u
Stop alarm: Confirm the message.
-or-
u
Close the door.
Fault
This message appears if there is a fault with the appliance.
An appliance component indicates a fault.
u
Open the door.
u
Note down the fault code.
u
Confirm the message.
w
The signal tone stops.
w
The status display appears.
u
Close the door.
u
Contact customer service. (see 9.4 Customer Services)
6.5.2 DemoMode
When “Demo” is shown in the display, the demonstration
mode is active. This function is designed for dealers, as all
refrigeration-related functions are deactivated.
Stopping DemoMode
If you see the following running in the display:
u
Confirm the display within the countdown.
w
DemoMode is off.
If the timer is not running:
u
Unplug the appliance.
u
Plug the appliance in again.
w
DemoMode is off.
7 Features
7.1 4-star freezer compartment
7.1.1 Opening/closing the freezer compartment
Fig. 9
Opening the freezer compartment:
u
Reach into the handle area from below.
u
Push the handle plate while pulling the door towards you.
Closing the freezer compartment:
u
Close the door while pushing from the front.
w
Door is engaged.
7.2 Hang-on trays
7.2.1 Repositioning / removing the hang-on
trays
Fig. 10
u
Push the hang-on trays upward.
u
Pull to the front.
u
Reinsert in the reverse order.
Features
* Depending on model and options
65
