4 Operation
4
Operation
4.1
Switching the appliance on
▸ Plug in the appliance at the mains socket.
–
«OF» appears on the left- and right-hand side of the display for 30 seconds.
▸ Hold the
button depressed for 3 seconds.
–
The appliance is switched on.
A newly installed appliance takes around 10 hours (empty state / without any food
inside) to reach normal operating temperatures. The corresponding zones con-
tinue to flash in the display until the temperatures are reached.
4.2
Setting the temperature
Setting range
The required temperature for each zone is entered one after the other.
Temperature zone
Degrees Celsius
[°C]
Fahrenheit [°F]
Refrigerator com-
partment
Setting range
3 to 9
38 to 48
Recommended setting
5
41
Freezer compart-
ment
Setting range
-24 to -14
-11 to 6
Recommended setting
-18
0
Second refrigerator
compartment
(MonoFridge is
activated)
Setting range
2 to 6
36 to 42
A combination of a high temperature setting in the refrigerator compartment and a low
temperature setting in the freezer compartment limits the setting range of the temperat-
ure zones.
Procedure
▸ Open the refrigerator compartment door.
–
The selected set temperature values are displayed for 5 seconds
–
and then the actual temperature values are displayed.
▸ Touch the
,
or
button.
–
The temperature display for the refrigerator compartment flashes on the left-hand
side of the display.
▸ Touch the
or
button and select the desired temperature for the refrigerator
compartment.
▸ Confirm with the
button to accept the entry.
–
The temperature display for the freezer compartment flashes on the right-hand side
of the display.
▸ Touch the
or
button and select the desired temperature for the freezer compart-
ment.
10