![background image](http://html1.mh-extra.com/html/v-zug/combair-xsl/combair-xsl_operating-instructions-manual_3305476017.webp)
5 Using the appliance
5.1
Selecting and starting the operating mode
▸ If the appliance is switched off: first press the adjusting knob.
▸ If the appliance is in another menu: press the
touch button.
–
The selection of operating modes appears in the display.
▸ Select the operating mode.
–
The operating mode settings appear in the display; a recommended value appears
above the temperature.
▸ Set the values for duration, end time, temperature or temperature level and target tem-
perature as required and confirm.
Press and go
Once all the necessary settings for the operating mode have been made, a bar appears
in the display and counts down 20 seconds. If no further settings are made during this
time, operation starts automatically. If a setting is changed, Press and go starts again.
The duration of Press and go can be adjusted (see page 35) or it can be deactiv-
ated in the user settings.
▸ To start operation immediately, i.e. without Press and go, select .
–
If set, the countdown to the time remaining appears in the display and in the digital
display.
The operating mode selected cannot be changed once it has started.
For appliances without a retractable handle: The handle remains extended both
during operation and until after operation has ended. It retracts when the appliance
has cooled down sufficiently.
Display overview
곍+RWDLU
6HWWHPSHUDWXUH
굴
굵
굶
굯
K
4
6
5
3
2
1
1
Operating mode settings
2
Current position of the adjusting knob /
selected setting
3
Press and go
4
Operating mode with symbol
5
Set values / recommended values
6
Symbols for settings
5.2
Checking and changing the settings
▸ Select the symbol for the desired setting.
▸ To change the value, turn the adjusting knob to the right or left.
▸ Press the adjusting knob to confirm the setting.
–
The operating mode settings are displayed.
–
The changed value can be seen above the corresponding symbol.
The end time can only be changed during the first 60 seconds of
operation.
17