![background image](http://html1.mh-extra.com/html/v-zug/combair-v200/combair-v200_manual_3112022015.webp)
7 User settings
7
User settings
The following setting can only be made in the Off operating state.
7.1
V-ZUG-Home
Switching on
▸ Turn the
dial to the
position.
▸ Turn the
dial clockwise as far as it will go and hold in this end-stop position for at
least 3 seconds.
–
The symbol flashes quickly.
–
The connecting mode is active for 60 seconds.
▸ Connect the appliance to the home network within this time (see page 14).
–
The symbol illuminates.
–
The V-ZUG-Home operating mode is switched on.
Switching off
▸ Turn the
dial to the
position.
▸ Turn the
dial clockwise as far as it will go and hold in this end-stop position for at
least 3 seconds.
–
The symbol is no longer illuminated.
–
The V-ZUG-Home operating mode is switched off.
Resetting to factory setting
▸ Turn the
dial to the
position.
▸ Turn the
dial clockwise as far as it will go (until the end-stop).
▸ Turn the
dial anti-clockwise to below «250 °C».
▸ Turn the
dial clockwise as far as it will go (until the end-stop).
▸ Turn the
dial anti-clockwise to below «250 °C».
▸ Turn the
dial clockwise as far as it will go (until the end-stop).
–
The symbol illuminates.
–
The factory settings are reset.
The temperature selector must be turned to below 250 °C twice within 6 seconds.
App access
If an operating mode is ended via the app, the appliance switches off and the symbol
flashes.
15
Содержание Combair V200
Страница 30: ...30 16 Notes...