V-ZUG Combair-Steam S, Руководство по эксплуатации

Страница: 13 / 84

… Appliance description
13
Using for the first time
Before operating the newly installed appliance for the first time the following steps
should be taken:
A
Remove all packaging and transport materials from the cooking space.
A
If the display on the right-hand side is flashing , turn the adjusting
knob to set the desired time.
– The display stops flashing after around 15 seconds and the time is set.
A
Heat the appliance without any food in it using the operating mode at maxi-
mum temperature for approximately 1 hour. There is likely to be some smoke and
odour given off, we therefore recommend ventilating the room well during this
phase.
General operating instructions
The operating mode, cooking space temperature and food probe temperature as well
as the cooking time and various other functions can be selected by pressing the ap-
propriate button once or more.
The symbol for the function selected illuminates or flashes.
The corresponding display flashes with a recommended value.
Turn the adjusting knob to change the recommended value.
Press the adjusting knob to start the appliance straightaway.
If the adjusting knob is not pressed, the appliance will start automatically around
15 seconds after the settings were last changed.
Additional settings or changes can be made at any time.
Press the button to switch off the appliance.