7 User settings
7.4
Descaling
The appliance can be descaled with this user setting.
▸ Touch the button.
–
The user settings menu appears in the display.
▸ Touch or repeatedly until the user setting appears in the display.
▸ Touch .
▸ Follow the instructions in the «Starting descaling» section (see page 39).
7.5
Water filter
The following applications are available with this user setting:
▪
Insert (see page 16) and enable (see page 17) the water filter
▪
Replace the exhausted water filter (see page 18)
▪
Permanently remove the water filter (see page 19)
7.6
Drinks settings
It is possible to display and reset the drinks settings for each profile.
▸ Touch the current user profile, e.g. profile 1 .
–
The user profiles menu appears in the display.
▸ Touch or repeatedly until the desired profile appears in the display.
▸ Select the desired profile, e.g. profile 2 .
▸ Touch the button.
▸ Touch or repeatedly until the user setting «Drinks settings»
appears in the dis-
play.
▸ Touch
.
–
The espresso drinks settings appear.
▸ Touch repeatedly until the drink to be reset is displayed.
▸ To cancel, touch .
▸ To reset the drinks settings for profile 2, touch .
7.7
Setting the time
The time shown in the display can be changed.
7.8
Auto-start
When this user setting is enabled, a time can be set for the appliance to switch on auto-
matically (e.g. every morning). This requires that the correct time be entered in the user
setting «Time». When this user setting is enabled, appears on the start screen. This
user setting is disabled by default.
7.9
Automatic shut-off
If no drinks are being delivered but the appliance is switched on, it will turn off automatic-
ally after a set time if there is no user interaction. The automatic shut-off can be set
between 15 minutes and 3 hours; the default setting is 30 minutes.
7.10
Cup warmer
When this user setting is enabled, coffee cups are preheated on the coffee cup tray (see
page 11). The time it takes to preheat them depends on the thickness of the cup walls
and the number of cups. This user setting functions only to a limited extent when the en-
ergy saving mode is enabled. This user setting is disabled by default.
28