V-ZUG CCSXSL60c, Руководство по эксплуатации

Страница: 42 / 52

9 Trouble-shooting
Displayed message Possible cause Solution
Add pre-ground coffee,
maximum one measure ▪ The «Ground coffee»
function has been se-
lected without placing
any ground coffee in
the funnel. ▸ Place a maximum of one
level measure of ground cof-
fee in the funnel (see page
22).
▸ Make the desired coffee
drink.
▪ The funnel is
clogged. ▸ Clean the funnel (see page
34).
▪ A «long» coffee using
ground coffee has
been selected. ▸ Place a maximum of one
level measure of ground cof-
fee in the funnel (see page
22).
▸ Touch and complete the
coffee delivery.
Fill beans container ▪ The beans container
is empty. ▸ Fill the beans container (see
page 15).
Ground too fine. Set mill 1
level higher while in oper-
ation ▪ The grinding is set
too fine.
▪ The coffee is de-
livered a drop at a
time, too slowly or not
at all.
▸ During the preparation of the
coffee, turn the adjusting
knob for the coffee mill clock-
wise one position at a time
(towards «7») until the coffee
is delivered satisfactorily (see
page 15).
▪ If the message ap-
pears again: ▸ Push the water tank back in
until it clicks into place.
▪ For water softener fil-
ters: An air bubble
has been released in-
side the circuit and is
obstructing the deliv-
ery of the drinks. ▸ Slide the hot-water/steam
spout on the connection
nozzle.
▸ Deliver hot water until the flow
becomes regular (see page
24).
42