![background image](http://html1.mh-extra.com/html/v-zug/aw-v6000/aw-v6000_operating-instructions-manual_3132410040.webp)
11 Trouble-shooting
Problem
Possible cause
Solution
The consumption
values for Eco-
Management dis-
played are too
high.
▪
The values can vary ac-
cording to programme,
load, additional func-
tions and user settings.
▪
System-related fluctu-
ations cannot be ruled
out.
▸ Observe the user settings and addi-
tional functions.
The programme
takes significantly
longer than indic-
ated.
The programme times
given serve only as a
guide. The duration can be
extended by, for example,
the following factors:
▸ Further information can be found in
the section on «Consumption val-
ues» (see page 44).
▪
Inlet water is very cold.
Heating is extended.
▸ No action is necessary.
▪
Washing detergent
dosage is too high.
▸ Reduce the amount of washing de-
tergent used next time.
▸ Adjust detergent dosage to the wa-
▪
Too unbalanced a load
during the intermediate
spin.
▸ Follow the trouble-shooting solution
for error message A5 (see page 36).
▪
Flow of inlet water is
low.
▸ No action is necessary.
▪
There are deposits or
fluff build-ups in the
draining system or for-
eign body trap.
▸ Follow the trouble-shooting solution
for error message A2 (see page 36).
11.3
Unsatisfactory wash results
Result
Possible cause
Solution
White residue on
washing
▪
Despite intensive rins-
ing, badly soluble com-
pounds in the detergent
can be left on the wash-
ing.
▸ Shake out or brush the wash items.
▸ Wash the items again with just a little
washing detergent.
▸ Use a liquid detergent that does not
contain zeolites.
▸ Select the «Black garments» textile
programme.
40