V-ZUG AdoraWash V4000 OptiDos, Руководство по эксплуатации

Страница: 36 / 64

11 User settings
11.6 Time
The time must be reset if the power is cut for more
than about 5 weeks. The appliance must not be dis-
connected from the mains supply for at least 30
minutes after making the settings.
19:43
▪ Clock
11.7 Spin speed
An increase in the spin speed is only possible for
suitable programmes. A reduction in the spin speed
is possible for all programmes. ▪ 400
▪ 600
▪ 800
▪ 1000
▪ 1200 (factory setting)
▪ 1400
▪ 1600
11.8 Degree of soiling
There are 3 settings for degree of soiling. ▪ Lightly soiled (factory set-
ting)
▪ Medium soiled
▪ Heavily soiled
11.9 AquaPlus
There are 5 settings for rinsing intensity. ▪ Basis (factory setting)
▪ more water
▪ + 1 rinse
▪ more water + 1 rinse
▪ Skin protection
11.10 Automatic door opener
When the function is turned on, the appliance door
opens automatically when the programme ends.
When the function is turned off, the appliance door
can be opened by touching the
button.
▪ On (factory setting)
▪ Off
11.11 Delayed start / OptiTime
When the «Programme start» function is turned on,
the time a programme should start running can be
defined.
When the «Programme end» function is turned on,
the time a programme should end can be defined. If
the «OptiTime» function is also turned on, the «Opti-
Time» function is automatically added whenever a
delayed start is selected.
▪ Programme start
▪ Programme end, OptiTime
on
▪ Programme end, OptiTime
off (factory setting)
36