4 Functions
RinsePlus
The cleaning effect is improved through additional rinsing cycles and an extended clean-
ing phase. If RinsePlus is turned on, the amount of water used with each programme is
increased. This extends the programme time.
DryPlus
The temperature of both the final rinse and the SteamFinish are increased and the dry-
ing time is extended.
4.3
Frequently used user settings
Childproof lock
The «Childproof lock» user setting prevents a programme from being started accident-
ally. If the childproof lock is turned on, it can be overridden by entering the four-digit
code (1223). The code is set at the factory and cannot be changed.
All in 1
The «All in 1» user setting adapts the programme ideally for use with detergent with in-
tegrated salt and rinse agent function. Combination cleaning agents are not suitable for
all degrees of water hardness (see page 28).
Wipe protection
The operating panel is locked briefly, e.g. for cleaning purposes.
4.4
EcoManagement
EcoManagement
Only active if «EcoManagement» is turned on in the user settings (see page 41).
EcoManagement provides information on the energy consumption and water con-
sumption of the appliance and supports the sustainable use of energy. The following
consumption information can only be retrieved when no programme is running:
▪
Energy and water consumption of the last programme
▪
Average energy and water consumption of the last 25 programmes
▪
Total energy and water consumption
The energy and water consumption of a programme is displayed during programme se-
lection. At the end of a programme, the energy and water consumption of the last pro-
gramme run is displayed.
The values can vary according to programme, load, additional functions and user set-
tings.
19
Содержание AdoraDish V6000
Страница 4: ...4 15 Service Support 59 ...