![background image](http://html1.mh-extra.com/html/v-zug/adora-slq-wp/adora-slq-wp_operating-instructions-manual_3118672039.webp)
7 Trouble-shooting
7.2
Other possible problems
Problem
Possible cause
Solution
The washing has
not been spun or
has been spun in-
sufficiently.
▪
The spin speed set is too
low.
▸ Increase the spin speed for the next
wash cycle (see page 28).
▪
Too large an unbalanced
load in the washing drum.
▸ Wash large and small items together.
▪
«Steam anti-crease» was
selected and the appli-
ance was not standing
level.
▸ Optimize appliance set-up according
to installation instructions.
The appliance vi-
brates heavily when
spinning.
▪
The transport lock has
not been removed.
▸ Remove transport lock (see page 6).
▪
The feet of the appliance
are not properly adjusted.
▸ Set appliance feet so that the appli-
ance stands level.
▪
The load could not be op-
timally balanced in the
washing drum.
▸ Wash large and small items together.
At the end of the
programme, the ap-
pliance door can-
not be opened with
the
button.
▪
The appliance door is
stuck.
▸ Press hard against the lock side of the
appliance door (i.e. front edge of appli-
ance door).
▸ Touch the
button again.
▪
An interruption in the
power supply.
▸ Use the emergency door release (see
Water sounds after
programme has fin-
ished when wash-
ing drum is turned
by hand.
▪
The vanes are filled with
water to compensate the
unbalanced load.
▸ The water is automatically pumped off.
No action is necessary.
Traces of condi-
tioner or water in
fabric conditioner
compartment.
▪
Siphon in fabric condi-
tioner compartment is
missing or not inserted
correctly.
▸ Insert the siphon correctly (see page
▪
Siphon or suction tube is
clogged.
▸ Clean siphon and suction tube (see
39
Содержание Adora SLQ WP
Страница 1: ...Operating instructions Adora SLQ WP Washing machine...
Страница 2: ...2 V ZUG Ltd CH 6302 Zug 2016...