![background image](http://html2.mh-extra.com/html/v-zug/adora-l/adora-l_installation-instructions-manual_3105464007.webp)
Installation instructions
Washing machine
One-family household
1014123-R03
31/10/2017
1014123-R03
7
8. Using for the first time
Work steps which do not have to be taken are marked as follows: –
Perform stability check
Strong vibrations are deliberately produced during the stability check in order to check that the appliance is standing firmly on the
ground.
Work steps
11010
11011, 11012
11013, 11014
▸
Prepare appliance.
▸
Insert plug into mains socket or turn on at wall switch.
▸
Remove drum contents, close appliance door.
▸
Turn on water tap.
▸
Select language.
–
▸
Press «
» to change lan-
guage.
▸
Touch language.
▸
Confirm language.
–
▸
Press «OK».
▸
Touch «OK».
In the display appears:
–
«Stability check»
«Stability check»
▸
Start stability check.
▸
Depress the
,
and
buttons simultaneously
for 5 seconds.
▸
Press «OK».
▸
Touch «OK».
Stability check starts.
The spinning sequence is carried out.
In the display appears:
–
«Creating unbalanced load,
please wait…»
«Creating unbalanced load,
please wait…»
After 2 minutes, in the display ap-
pears:
«Check stability»
«Check stability»
▸
Check stability.
▸
Realign adjuster feet if necessary. The appliance must stand level with all 4 feet firmly on the
installation plate and not wobble. The user must carry out a visual and haptic assessment as
the appliance cannot detect or display the set-up.
▸
Complete initial set-up.
▸
Press the
button.
▸
Press the
button.
▸
Touch the
button.
In the display appears:
–
«Create unbalanced load fin-
ishing…»
«Create unbalanced load fin-
ishing…»
Spinning sequence is finished.
The appliance is drained.
▸
Check stability.
▸
Realign adjuster feet if necessary.
▸
Repeat stability check if neces-
sary.
▸
Depress the
,
and
buttons simultaneously
for 5 seconds.
▸
Depress the
,
and
buttons simultaneously
for 5 seconds.
▸
Depress the
,
and
buttons simultaneously
for 5 seconds.
Stability check is finished.
The appliance is ready for operation.
▸
Set time and date.
–
▸
Press any main programme
button.
▸
Follow the instructions.
▸
Touch any button.
▸
Follow the instructions.