V-ZUG 81 A, Руководство по эксплуатации

Страница: 17 / 24

5 Settings
Parameter with
factory setting Function Description
P–08 20
Amount charged Amount transferred to the user card while
charging.
P–09 1xxxx Charge access
code error Access code for the charge card. Each cash-
ier system has a separate code. The code is
transferred the first time the charge card is
used. If required, the same access code can
be set for all cashier systems.
P–10 0
Number of cards
charged Shows total number of times cards were
charged (can be reset).
P–11 300 Shut-off delay time
for appliance 1 Depending on the washing machine or
tumble dryer connected, there are pauses
during a programme sequence (gaps in the
power being supplied). As soon as there is a
gap that is greater than the set switch-off
delay time (end of programme), debiting
stops.
P–12 300 Shut-off delay time
for appliance 2 Depending on the washing machine or
tumble dryer connected, there are pauses
during a programme sequence (gaps in the
power being supplied). As soon as there is a
gap that is greater than the set switch-off
delay time (end of programme), debiting
stops.
P–13 200 Current response
threshold for appli-
ance 1 Changing the current response threshold de-
termines the level of power consumption from
which the debiting begins.
P–14 200 Current response
threshold for appli-
ance 2 Changing the current response threshold de-
termines the level of power consumption from
which the debiting begins.
P–15 2 Switch-on delay
time for appliance
1 For the appliance to start debiting, the power
being consumed must lie above the current
response threshold for the duration of the
time set.
P–16 2 Switch-on delay
time for appliance
2 For the appliance to start debiting, the power
being consumed must lie above the current
response threshold for the duration of the
time set.
P–17 D
Language setting For changing the language of the plain text
display.
P–18 1 Acoustic signal To activate the acoustic signal in the case of
an error message 0 = Off / 1 = On
17