![background image](http://html1.mh-extra.com/html/v-zug/12013/12013_operating-instructions-manual_846554033.webp)
13 Technical data
13.1
Note for testing institutes
▸ The appliance must be connected to the electricity supply for at least 5 minutes be-
fore taking measurements.
▸ The declaration data can be determined correctly only after a run-in phase of 5 com-
plete drying programmes with washing (automatic programme: normal dry
).
▸ Wash the door filter each time after completing a drying programme.
▸ The moisture sensor of the appliance is calibrated based on average water hardness
levels. To adjust the water conductivity value of the appliance according to the norm
(750 µS/cm), the level of dryness must be set to «1» in the user settings (see page
23).
▸ Set to the standard programme according to AS/NZS 2442.2:2000:
Programme
Load
capacity
Work steps
Standard programme
7 kg
▸ Press the
button.
▸ Press the
button.
▸ Press the
button.
Data for the standard programme
Load capacity kg
Programme duration
hrs./mins.
Energy star rating
Energy consumption
kWh
7
3h30
1.40
13.2
Consumption values
Automatic programmes
The stated values for the programme duration and energy apply for the maximum stated
capacity with a wash spun at around 1200 rpm (corresponds to a moisture level of ap-
prox. 60%). A higher spin speed or a smaller load reduce them by approx. 20–30%.
Programme
Load capacity
kg
Remaining
moisture content
%
Programme
duration
hrs./mins.
Energy
kWh
Extra dry
1–7
-4 to -1
2h15
1.45
Normal dry
1–7
–1 to 2
1h55
1.30
Iron dry
1–7
8 to 16
1h35
0.99
Damp
1–7
20 to 30
1h20
0.74
33