1. See Figure 2. Record the current notch position for each docking point. Remove the screw (6) from all four docking point pins.
2. Remove threadlocker from the docking point screws and mounting hole threads before applying Loctite 243 - Blue to the screw threads. Install the docking points,
screws and washers. Tighten finger-tight.
3. If the notches are not in vertical position (F), rotate the docking points slightly, moving the notches toward (F) until a tight fit of the detachable accessory is achieved at
each location.
4. Tighten the docking point screws to 14.2 N·m (10.5 ft-lbs).
5. If the docking point insert notches are in vertical position (F):
a. Remove the screw (6) from all four docking point pins.
b. Rotate each docking point until the second notch reaches position (E).
c. Remove threadlocker from the docking point screws and mounting hole threads before applying Loctite 243 - Blue to the screw threads. Install the screws and
washers. Tighten finger-tight.
d. Check the detachable accessory at each docking point, rotating the notch toward (F) until a tight fit of the detachable accessory is achieved at each location. Tighten
the screws to 14.2 N·m (10.5 ft-lbs).
6. After multiple adjustments, if the detachable accessory continues to rattle or remains loose, replace the docking points.
SERVICE PARTS
Figure 2. Service Parts, Four-Point Detachable Docking Hardware Kit
Table 1. Service Parts
Item
Description
(Quantity) Part
Number
1
Docking plate assembly, chrome (right side, shown)
52300348
Docking plate assembly, black (right side, shown)
52300355
2
Docking plate assembly, chrome (left side, not shown)
52300349
Docking plate assembly, black (left side, not shown)
52300356
3
Spacer, docking point (2)
12400059
4
Docking
point
(4)
52300345
5
Plain washer, chrome (4)
10300079
6
Cap screw, flat head TORX, 1/4-20 x 16 mm (⅝ in) long (4)
10200322
7
Cap screw, TORX head, 5/16-18 x 25 mm (1 in) long (4)
10200157
8
Plain washer, zinc finish (4)
6302
Items mentioned in text:
A
OE slot cover insert (2)
B
Slot cover insert attaching screw (4)
C
Long docking plate pin (2)
D
Docking point plastic insert (elliptical shape exaggerated for clarity)
E
Notch in plastic insert (2)
F
90 degree maximum docking point adjustment range (x2)