RAPID-VSC-DEM
Instructions - user maintenance manual
-
©02/20 Rev:1.0
/TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 17
CHAPTER 3 - M
ACHINE SAFETY AND PROTECTION
3.1 S
AFETY RULES FOR MECHANICAL RISK
▪
Do not put your hands in front of the wand; high-pressure nozzles can be extremely dangerous when
used improperly
▪
When the work is completed, after stopping the machine, release the residual pressure in the delivery
pipe and in the pump by operating the gun lever.
▪
Unwind the high-pressure hose completely before use.
▪
Lock the machine if fitted with wheels before using it once positioned.
3.2 S
AFETY RULES FOR THERMAL RISK
(
BURNS
)
▪
Do not put your hands in front of the wand; high-pressure nozzles can be extremely dangerous when
used improperly.
▪
If the machine is used in petrol and filling stations or other dangerous places, the relevant safety
regulations must be observed.
▪
Do not touch the engine, chimney, boiler or other parts when the machine is switched on or immediately
after it is switched off.
▪
Diesel refuelling must only be carried out when the machine is switched off.
▪
Do not use fuels other than those specified by the manufacturer.
▪
When the work is completed, after stopping the machine, release the residual pressure in the delivery
pipe and in the pump by operating the gun lever.
▪
It is strictly forbidden to carry out any work on the machine unless you are equipped with personal
protective equipment (protective goggles, gloves, overalls, etc.) in accordance with current regulations.
▪
During the winter and in the event of frost, it is advisable to have antifreeze sucked in or empty the
water in the internal circuits by closing the tap on the water mains and running the machine until it is
completely drained.
▪
If the machine is left idle for a long period of time, limescale build-up may form on the valve seats and
cause starting problems, so pay close attention to any abnormal noises and consult your local technical
service.
3.3 S
AFETY STANDARDS FOR ENVIRONMENTAL RISK
▪
It is strictly forbidden to wash engines in unsuitable spaces, this operation must only be carried out in
places where, for environmental protection, a suitable oil separator is installed.
Substances such as engine oil, diesel fuel or petrol must not be released into the environment.
Please protect the soil and dispose of used oil in accordance with environmental regulations.
