7
INTRODUCTION
Thank you for purchasing a product from the V-TUF Industrial Cleaning Equipment range.
V-TUF is focused on research and development to make sure you are fully satisfied with your purchase.
Please read this manual carefully and follow the instructions to ensure you get the best performance
from this machine.
Congratulations on your choice and we trust you will obtain satisfaction from using it.
GENERAL INFORMATION
1. This manual has been included as an integral part of the appliance and should becarefully read
through before using the machine.
2. Take the appliance out of its packaging and make sure it is in perfect condition, including accessories
and any optional extras you have purchased from the V-TUF range.
3. Make sure that the electrical data of the appliance, shown on the label, corresponds to those of the
mains supply.
4. The appliance must only be used with V-TUF accessories and spare parts as these ensure safe and
perfect operation.
5. The manufacturer disclaims all liability for injury to persons and animals and damage to things due
to the irresponsible use of the appliance and to the use of non-original accessories and spare parts.
6. The repair and/or replacement of the various component parts, especially electrical parts, must be
done by skilled personnel.
7. The appliance is suitable for use in a range of applications: (hotels, schools, factories, shops, etc...)
INSTALLATION
1. Check the position of the filter and the clips that fasten the head to the tank.Incorrect filter positioning
can cause serious damage to the machine.
2. Fit the hose to the vacuum connector; fit the required accessory to the end of the hose. Inthe case of
extractor models fit the pipe on the connector provided on the head and fit the required accessory to
the end of the pipe.
3. Connect the power cable of the appliance to the power socket with switches on "0" (OFF POSITION).
4. To vacuum liquids, empty the dust from the container remove dust bag and ensure the cloth filter is
fitted. After the vacuum has been used for wet use ensure the tank and cartridge filter is dry before
vacuuming dry material.
5. Important: only refit the cloth filter to vacuum dust, so as not to cause problems to the appliance.
6. The noise level is below 85 dB(A)
OPERATION INSTRUCTIONS
1. Ensure that there is sufficient ventilation for the machine and the operator
2. Make sure the machine on a sound and stable surface.
3. Ensure the machine is switched to the off position, connect to the correct and sufficient power source,
switch machine on, use according to the guidelines and turn machine off after operation.
IMPORTANT
1. The wet and dry machines feature a floating valve that interrupts the vacuum when the tank is full of
liquid. When this occurs, turn the machine off and empty the entire contents of the tank.
2. Do not use your machine if it is not functioning correctly. Regularly inspect electrical leads and
connections, filters and listen for unusual noises. If in doubt, contact your nearest service centre for
advice.
MAINTENANCE
1. The filter element can be blown clean, washed with water. Ensure that it is completely dry before
the operation.
2. Replace the vacuum filter if it acquires holes, torn or damaged.
Holes and/or cuts on the sides of the filter could allow transit of dust / materials and become
the cause of serious damage to the user and surrounding people, and the appliance.
3. Check and free the blocked parts (vacuum pipes, connector, brushes, etc.) from any deposited
materials.