V-TUF MAMMOTH XLR, Руководство пользователя

Страница: 5 / 15

5 | P a g e
OPERATION INSTRUCTIONS
1. Ensure that there is sufficient ventilation for the machine and the operator
2. Make sure the machine on a sound and stable surface.
3. Ensure the machine is switched to the off position, connect to the correct and sufficient
power source, switch machine on, use according to the guidelines and turn machine off
after operation.
IMPORTANT
1. The wet and dry machines feature a floating valve that interrupts the vacuum when the
tank is full of liquid. When this occurs, turn the machine off and empty the entire contents of
the tank.
2. Do not use your machine if it is not functioning correctly. Regularly inspect electrical leads
and connections, filters and listen for unusual noises. If in doubt, contact your nearest service
centre for advice.
MAINTENANCE
1. The filter element can be blown clean OR washed with water. Ensure that it is completely
dry before the operation.
2. Replace the vacuum filter if it acquires holes, torn or damaged.
Holes and/or cuts on the sides of the filter could allow transit of dust / materials and become
the cause of serious damage to the user and surrounding people, and the appliance.
3. Check and free the blocked parts (vacuum pipes, connector, brushes, etc.) from any
deposited materials.
4. If necessary, clean the tank and in any case, never leave dust or liquid residues in the tank
for long periods of time.
IMPORTANT INFORMATION
Never use the machine if you are unsure or become uncertain due to any faults of any kind,
including those not mentioned in this manual.
Technical Information
Model MAMMOTH XLR
Capacity 110 Litres
Working Voltage 110 & 240 Volts
FILTER SHAKER No
Total Motor Power 2000W 110V (2 motor) & 3000W 240V (3 motor)
Function Wet & Dry Vacuuming
SUCTION LIFT POWER MAX 25KPA (250MBAR)
Cooling Mode 250mm
Height 970 mm
Accessories Ø38mm Accessories Kit
Power Cable 5m