-6-
Unlock parameter setting(set on monitor)
LOCK
Take off the Jumper
POWER
SUPPLY
BUS
PL
S+
S-
Door Lock Controlled with Dry Contact
Note:
1. The external power supply must be used
according to the lock.
2. The inside relay contact is restricted to AC or
DC 24V/1A.
3. The jumper must be taken off before connecting.
4. Setup the
Unlock Mode
of Monitor for
different lock types.
•
Power-on-to-unlock type:Unlock Mode=0 (by
default)
•
Power-off-to-unlock type:Unlock Mode=1
Note:
1.must connect DT601(F)/ID/FE correctly before setting.
2.the parameter will be saved in DT601(F)/ID/FE automatically, so you need only set on one monitor.
3.Here we take DT47MG(the monitor) for example, please refer to the corresponding user manual.
•
On main menu page, touch
[Logo]
icon to enter
About
page.
•
When the screen stay in
About
page, press
UNLOCK
button on front panel and hold for 2
seconds.
•
A keypad is shown.
Refer to the followings:
00:10 DS-1
About
Local Address
00.00
Video Standard
AUTO
System Verson
00.01.00
Display Driver
1.0
Font
1.0
UI
1.0
INSTALLER SETUP
123
_
? + OK: Help Menu
@ + OK: Address Setting Menu