V-Tec D250, Руководство пользователя, Страница: 11 / 24

-11-
Nameplate Illumination Mode Setting
Unlock Time Setting
There are 3 illumination modes for nameplate indicator, Normally on , Normally off and Auto .
Normally on is default, to change the setting, please follow the steps:
D
efault unlock
ing
time is 1s
. It
can be changed
to desired time. Available s
etting
range is 1s~99s
ec. Please, f
ollow the steps:
SETUP INSTRUCTIONS
UNLOCK Indicator:ON TALK
Indicator:OFF
Buzzer
Beep+, Beep
In standby press
KEY_SET button three
times
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzze
r
Beep,Beep.
.
Press and hold KEY_2 The
time you holding
down
is the
new unlock
ing
time
UNLOCK Indicator:ON
TALK Indicator:OFF
In standby mode, press
KEY_SET button three
times .
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_3 button to set
the nameplate illumination
mode to Normally on .
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_3 button again
to set the nameplate illumina-
tion mode to Normally off .
UNLOCK Indicator:ON
TALK Indicator:OFF
Press KEY_3 button again
and again to set the nameplate
illumination mode to Auto .
Press KEY_3
• When entering time delayed setting, the buzzer sound one time every second.
• The LED_NAME indicator will blink all the time until exit out the setting mode.
• If without any operation in 10 seconds, it will exit out setting mode automatically.
• In this step,press KEY_SET button twice to exit out the setting mode manually.
• If setting mode has not been exited, you can change the nameplate illumination mode by pressing KEY3
circularly.
• The LED_NAME indicator will blink all the time until exit out the setting mode.
• If without any operation in 10 seconds, it will exit out setting mode automatically.
• In this step,press KEY_SET button twice to exit out the setting mode manually.