V-Tec AT16, Руководство пользователя, Страница: 10 / 12

7. Remote Control Function(optional)
According to 4.4 , select
Other Settings...
item . A add/
del remote page will be showed. this item is for adding
and deleting Remote function.
1. Add Remote
2. Del Remote
3. Exit
3.
Out-Delay Period:
after you arm the system, you
will get into Out Delay Period, monitor will
sent out short “Di” every 3 seconds; you
will hear a long “Di~” at the end of the Out
Delay Period, and the system is gotten into the
protecting status. By default, the Out Delay
Period is 40 seconds, users must get out off the
room within 40 seconds, otherwise the system will treat the user as a invader and sent out
the alarm signal.
4.
In-Delay Period:
When the system is armed, the defence alarm are activated, to disarm
the alarms. When you come into the room, you have 40 seconds to deactivate the
sensors(by enter MAIN --> ALARM menu, select Disarm item); if you didn’t
deactivate the sensors after 40 seconds, the monitor will sent out alarm sound and sent
the alarm signal to the Guard Unit.
5. 40 seconds is the default setting for in-out delay time, it can be changed by the
administrator.
D A
B C
[A] Button:
Work as Emergency Help Button, press
and hold this button for 3s, the monitor will sent out the
emergency help signal to the guard center.
[B] Button:
Arm button, press and hold this button for
1s will arm the system(same result as enter MAIN -->
ALARM menu, select Arm item).
[C] Button:
Disarm button, press and hold this button
for 1s will disarm the system(same result as enter MAIN
--> ALARM menu, select Disarm item).
[D] Button:
Use this button to release the door.(same
result as press the Unlock button on monitor).
7