V-TAC VT-81010 Скачать руководство пользователя страница 3

Страница: 3 / 4

INSTALLATION

WIRING DIAGRAM

SENSOR INFORMATION

TEST

• Turn the TIME knob anti-clockwise on the

minimum (10S). Turn the LUX knob clock-

wise on the maximum (sun).

• Switch on the power; the sensor and its

connected lamp will have no signal at the

beginning. After Warm-up 30sec, the sen-

sor can start work. If the sensor receives the

• Switch off the power.

• Unload the transparent cover.

• Connect the power to connection terminal of sensor according to connection-wire diagram.

• Install back the transparent cover into the original location.

• Fold the metal spring of the sensor upwards and then put the sensor into the suitable hole or

installation box. Releasing the spring, the sensor will be set in this installation position.

• After finishing installing, turn on the power and then test it.

Height of Installation: 1.8-4m

DETECTION DISTANCE: Max. 8m

Содержание VT-81010

Страница 1: ...DATA INTRODUCTION WARRANTY Thank you for selecting and buying V TAC product V TAC will serve you the best Please read these instructions carefully before starting the installation and keep this manual...

Страница 2: ...tart to time from the moment As the detector responds to changes in temperature avoid the following situations INSTALLATION ADVICE Avoid pointing the detector towards objects with highly reflective su...

Страница 3: ...ves the Switch off the power Unload the transparent cover Connect the power to connection terminal of sensor according to connection wire diagram Install back the transparent cover into the original l...

Страница 4: ...ntation is correct The sensor can not shut off the load automatically a Please check if there is continual signal in the detection field b Please check if the time delay is set to the maximum position...