HARDWARE
1. Statement
Thank you for using our product, please contact us if you have any question. This guide is for Wireless NVR Kit.
Content may be modified and updated based on new function. The function of the actual products maybe a little
different from the guide, please operate it referring to actual products.
2. Attention
①
Do not install the wireless NVR in humid and dusty environment.
②
Put the wireless NVR in drafty environment in case of ventilation port being blocked.
③
Check the power supply to avoid damage because of voltage mismatch.
④
Make sure the wireless NVR working within suitable temperature and humidity environment.
⑤
Please install the wireless NVR horizontally, and avoid vibration.
⑥
Short circuit may occur when dust become wet on circuit board. Please clean the dust
on circuit board, connectors, and NVR case.
⑦
Explosion may happen because of improper replacement of battery, do not replace it by yourself;
If you need, make sure it is the same type of battery. And do not open or repair it.
⑧
Please use suitable and professional hard disk to ensure continues and stable recording.
⑨
Lightning protection is needed when device is connected to communication cables.
Ethernet cable which comes form outside, connecting to the wireless NVR directly is forbidden.
3. Open and Check
Open the package when received, put the products and spare part in suitable place, check them based on packing
list. If there is anything broken or missing, please contact to us as soon as possible.
Hardware
Attention:
Please use suitable and professional hard disk; Do shut off power before installation.
Step 1:Put the NVR on table horizontally, loosen 4pcs M3*6 screws,as picture1-1 shows;
Step 2: Push the cover to the back direction , connect data cable and power supply cable to the ports on
hard disk separately, as picture 1-2 shows.
Picture1-1
3
4
1
2
Picture1-2
1.Hardware Disk Installation