1. Switch off the main power before installation
2. Push the conduit of the recessed box with a screwdriver
3. Open the emergency light with a help of a screwdriver (Figure A).
4. Place the Recessed Box on the Wall cutting and Insert the Lead wires from the
wall through the Recessed box and base cover hole as shown in (Figure B).
5. For connecting the wires, pull out the connector from the front cover, unscrew the
screws on them and connect the lead wires to PCB AC and green terminal.
6. Put back the connector on the front cover.
7. Place back the front cover on the base
8. Switch on the main power
II RECESSED/FLUSH MOUNTING (For wall only):
RECESSED INSTALLATION METHODS
3. RECESSED
BOX
2. BASE
CONDUIT
1. REFLECTOR
