INSTALLATION INSTRUCTION
FUNCTION OF SENSOR
1. Drill two holes on the wall and insert two plastic expansion bolts in it.
2. Fix the iron bracket on the plastic expansion piece with self-tapping screws.
3. Open the lamp and turn on the switch.
4. Tighten the lamp and test
1. Press the switch(turn on)
2. Turns 100% brightness when motion is detected and 10% light when people go away
3. Turn off
MAINTENANCE & WARNING
• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee
flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top).
• Confirm no objects blocking the solar panel to receive sunlight.
• Keep away from the fire.
• Don’t immerse in the water.