INSTALLATION INSTRUCTION
FUNCTION OF SENSOR
MAINTENANCE & WARNING
1. Open the lamp and install the bulb in the lamp.
2. Drill two holes on the ground and insert two plastic expansion bolts in it.
3. Fix the plastic plate on the plastic expansion piece with self-tapping screws.
4. Fix the lamp body on the plate and tighten the screws.
5. Switch on and test
• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee
flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don’t immerse in the water
1. Press the switch(turn on)
2. Turns 100% brightness when motion is detected and 10% light when people go away
3. Turn off
