INSTALLATION INSTRUCTION
SENSOR MODES
MODE 1
MODE 2
1. Power off the device.
2. Drill the hole to the required depth of 30mm.
3. Insert the plastic cap, Place the plastic cap into the hole.
4. Attach the base plate, Secure the base plate to the wall using the
provided screw.
5. Slide the device up and down to fits securely onto the base plate.
6. Adjust the Sensor detection angle. Modify the angle according to
your needs.
7. Power on and test the device.
Safe lighting options. After no human movement is detected for 30 seconds, the lights are
automatically lowered to 15Lm brightness. Will automatically turn down the brightness to
15Lm (default setting).
press the switch for 3 seconds while the lamp is turning on, the light will flash 2 times, and
it will be changed to second mode (the lamp is 100% bright when some one is moving,
and automatically turn off after none is moving within 30s)
