V-MAX
®
2
2. Connect the alligator clip of the 4” white pigtail leads to the transmitter. Squeeze the small clip on the lead wires
and slide over the snap-stud of the transmitter.
3. Place the transmitter in the elastic sleeve. This will help insure the clips remain attached and protect the
transmitter.
4. You now have a transmitter that is adapted to 'look like' the standard snap-on block transmitters.
5. Connect the 2 lead wires (1 white 26”, 1 black coil) to the 2 4” white pigtail wires. We have found the polarity
issue is NOT a problem with most horse applications. A few may require the leads to be reversed.
