Version 21.02.2017
CI-VL2-MMI3G-xxx
P
a
g
e
9
2.3.
Connecting Video-interface and CAN-box
Note:
It is possible to use the interface without MMI-box. In this case sort the female 8pin
connector out from the 6pin to 8pin cable.
Connect white female 4pin Micro-Fit connector of the PNP power/CAN cable to the
male 4pin Micro-Fit connector of the CAN-box.
Connect white female 6pin connector of the 6pin to 8pin cable to the male 6pin
connector of the video-interface.
Connect black female 8pin Micro-Fit connector of the 6pin to 8pin cable to male 8pin
Micro-Fit connector of the MMI-box.
Note:
Check LEDs on video-interface after reconnecting the battery, one must be on.
Connect the separate white cable to MMI signal – only for alternative switching of
sources by NAV button in the centre console, if existing. (only for MMI 3G, not for
MMI 3G+ or RNS850).
Connect the female 8pin connector of the6pin to 8pin cable`s drilled communication
cable to the male 8pin connector of the MMI box
